Vibration Isolation
(click here)

Test Fixtures
(click here)
_  
BASE PLATES

- OVERVIEW & EXAMPLES

- SIZES (METRIC & US)

- SURFACE ACCURACY DIN 876

- MACHINED T-SLOTS DIN 650

- ANCHORS & LEVELING

- EXAMPLES

- INSTALLATION
VIBRATION ISOLATION
FLOOR CLAMPING RAILS
SURFACE PLATES
STRAIGHTENING PLATES
BLUEING PLATES
MEASURING MACH PLATES
PLATE SUPPORTS
- SUPORT FRAMES TYPE LU
- SUPPORT FRAMES TYPE UU
SURFACE ACCURACY DIN 876 
ANGLE PLATES
- TYPE WN
- TYPE WS/WSN
- SPECIAL DESIGNS
T-SLOT TABLES
MACHINE TABLES
BOX CUBES
BOX TABLES
FORGE AND SWAGE PLATES
PARALLEL VEES
CUSTOM DESIGNS

SURFACE ACCURACY DIN 876

TOLERANCES

MACHINED T-SLOTS DIN 650

T-NUTS, BOLTS & WASHERS
T-SLOT COVERS
NON-SHRINKING GROUTS
EXAMPLES
Lightweight Table Support Frame, Type LU

This support frame is especially for use with marking-off tables and surface plates. Manufactured from welded steel sections for maximum rigidity. For precision plates it is recommended that optional leveling screws be specified to allow the plates to be aligned accurately in the horizontal plane. The support frames are manufactured to give a working height for the supported plate of approx. 800 mm, however, other working heights are available on request. Plates larger than 1200 x 1000 mm should be supported on type VS units.

Base Cabinets
Base cabinets for marking-off tables and surface plates are manufactured on request. Stability is afforded by the sheet metal construction, the door is supplied with a lock, the floor is inserted.




_For more information: E-mail: contact@cfm-itbona.com Phone:t +1 (952) 942-6104 FAX: +1 (952) 942-6106
Copyright@2002 - 2006 CFM-ITBONA LLC. All Rights reserved
CFM-ITBONA LLC, 4282 SHORELINE DRIVE, SPRING PARK, MN 55384, USA
CFM-ITBONA HOME GOTO VIBRATION ISOLATION GOTO TEST FIXTURES GOTO STOLLE HOME