<% ' Declare local variables: DIM flagSecure, varHeader, varHTTP, varHTTPS, varWelcome ' Flag for marking site as secure flagSecure = 0 ' no secure 'flagSecure = 1 'secure ' Set Header Text ' varHeader="" 'No Text 'varHeader = "Welcome" 'Display Header Text Select Case Request.QueryString("ProductGroup") Case "1" varHeader = "> Products > Standard Clamping Elements" Case "2" varHeader = "> Products > Clamping and Fixture Systems" Case "5" varHeader = "> products > Clamping and Fixture Systems > Modular Fixture Systems" Case "3" varHeader = "> Products > Toggle Clamps" Case "4" varHeader = "> Products > Casting Plates" End Select 'Set file path varHTTP = "http://www.itbona.com/itbona-machinetool" varHTTPS = "https://www.itbona.com/itbona-machinetool" 'Set welcome message if session("MM_UserName") <> "" Then varWelcome = "You are logged-in " & (Recordset2.Fields.Item("strFirstName").Value) & " " & (Recordset2.Fields.Item("strLastName").Value) Else varWelcome = "" End If ' Set Product Info DIM varProductInfo, varProductPageLink 'varProductInfo = "1" 'Logo will appear ' varProductPageLink = "http" %> AMF Products: clamping bolts, nuts and washers

Casting Plates
(click here)

Test Fixtures
(click here)

Vibration Isolation
(click here)
_ Product Information
Contact
About CFM-ITBONA
AMF Company Profile
_T-BOLTS, NUTS AND WASHERS
Product Information
- Clamping bolts, nuts and washers
- DIN 787 Bolts for T-slots
- DIN 787 Bolts for T-slots w/ nuts & washer
- DIN 787 Bolts for T-slots 12.9
- DIN 6379 Studs
- DIN 508 Nuts for T-slots (T-nuts)
- DIN 508 T-nuts with spring
- DIN 508 C Nuts for T-slots, extended
- DIN 510 Nuts for T-slots, "Rhombus"
- DIN 508 R Blanks for T-nuts
- DIN 6330 B Hexagon nuts
- DIN 6334 Extension nut, 3 dia
- DIN 6331 Collar nuts
- DIN 6319 C Spherical seat washer
- DIN 6319 D Dished washer
- DIN 6319G Dished washer
- DIN 6340 Washer
_CLAMPS
Product Information
- No. 6313K Clamp short, with saddle
- No. 6313L Goose-neck clamp long, with saddle
- No. 6314V Tapered clamp with support screw
- No. 6315V Stepped clamp with support screw
- No. 6316V Goose-neck clamp with adj. screw
- No. 6314AV Stepped clamp with support screw
- No. 7000 Step clamp
- No. 6321 Stepless height adjustable clamp
- DIN 6314 Plain Clamp
- No. 6314Z Step Clamp
- DIN 6315B Forked clamp tapered
- No. 6315GN Forked clamp with shoe
- DIN 6315C Forked clamp with pin end
- DIN 6316 Single goose-neck clamp
- No. 6317 Double goose-neck clamp
- No. 6315M Clamp w/ cylindrical magnetic insert
- No. 6315MS Clamp lateraly cranked, with cylindrical magnetic insert
_CLAMPING SETS AND ACCESSORIES

Product Information
Clamping sets
- Spring Type Clamp Support
- T-slot scraper
- Single-ended open jaw-spanner
- Chain clamping set
- Fixtures for T-nuts
  - Heavy duty Thread paste
T-slot Covers of profiled Aluminum


Concerning: Clamping bolts, nuts and washers

Our Quality :
There are strong reasons for demanding operators to only use our clamping bolts of highest quality:

  • Strict checks guarantee a consistent quality level.
  • High quality clamping bolts and nuts last longer, reduce tool management and idle periods resulting in more economy in the long run.

Material:
 Tempering steel to DIN regulations within tensile strength classes 8.8, 10.9 and 12.9

Machining:
 All bolts and studs have rolled threads and guarantee high clamping forces and long life.

Tempering:
 Tensile strength classes according to DIN regulations.

Please note!
 The torque which can be achieved by hand can be higher than required by DIN standard for screws sizes up to 12 mm dia.
Result: Only under worst conditions will the screw first of all twist and eventually break when overstressed. A small but decisive contribution to safety at the workplace.
Our bolts, T-nuts and nuts are manufactured to DIN 267 and ISO 898. By galvanizing tempered and hardened components there is a certain risk of the material getting brittle. In the event of components being subsequently galvanized we refuse all possible claims regarding breakage and damages.
 
_  
For more information: E-mail: contact@itbona.com Phone:t +1 (952) 942-6104 FAX: +1 (952) 942-6106
Copyright@2002 - 2004 ITBONA Inc. All Rights reserved
ITBONA Inc, 9919 Valley View Rd, Suite 9919, Eden Prairie, MN 55344, USA