Casting Plates
(click here)

Test Fixtures
(click here)

Vibration Isolation
(click here)
_ CLAMPING SETS AND ACCESSORIES
Contact
About CFM-ITBONA
AMF Company Profile
_T-BOLTS, NUTS AND WASHERS
Product Information
- Clamping bolts, nuts and washers
- DIN 787 Bolts for T-slots
- DIN 787 Bolts for T-slots w/ nuts & washer
- DIN 787 Bolts for T-slots 12.9
- DIN 6379 Studs
- DIN 508 Nuts for T-slots (T-nuts)
- DIN 508 T-nuts with spring
- DIN 508 C Nuts for T-slots, extended
- DIN 510 Nuts for T-slots, "Rhombus"
- DIN 508 R Blanks for T-nuts
- DIN 6330 B Hexagon nuts
- DIN 6334 Extension nut, 3 dia
- DIN 6331 Collar nuts
- DIN 6319 C Spherical seat washer
- DIN 6319 D Dished washer
- DIN 6319G Dished washer
- DIN 6340 Washer
_CLAMPS
Product Information
- No. 6313K Clamp short, with saddle
- No. 6313L Goose-neck clamp long, with saddle
- No. 6314V Tapered clamp with support screw
- No. 6315V Stepped clamp with support screw
- No. 6316V Goose-neck clamp with adj. screw
- No. 6314AV Stepped clamp with support screw
- No. 7000 Step clamp
- No. 6321 Stepless height adjustable clamp
- DIN 6314 Plain Clamp
- No. 6314Z Step Clamp
- DIN 6315B Forked clamp tapered
- No. 6315GN Forked clamp with shoe
- DIN 6315C Forked clamp with pin end
- DIN 6316 Single goose-neck clamp
- No. 6317 Double goose-neck clamp
- No. 6315M Clamp w/ cylindrical magnetic insert
- No. 6315MS Clamp lateraly cranked, with cylindrical magnetic insert
_CLAMPING SETS AND ACCESSORIES

Product Information
Clamping sets
- Spring Type Clamp Support
- T-slot scraper
- Single-ended open jaw-spanner
- Chain clamping set
- Fixtures for T-nuts
  - Heavy duty Thread paste
T-slot Covers of profiled Aluminum


Clamp (DBP 43 37 658)

Laterally cranked, with cylindrical magnetic insert
Clamp: Tempering Steel, varnished..

No. 6315MS Clamp Laterally cranked with Cylindrical Magnetic Insert

For CAD-files or price information click here or choose from the following:

e-mail to contact@itbona.com
FAX to: +1 (952) 942-6106
Call: +1 (952) 942-6104

Application:
For right- and left hand use. The lateral cranks cater for enough space permit machining of workpieces, even under unfavourable conditions. This process allows for a complete machining run for one single clamping set-up, resulting in higher precission, less waste of time and less rejects.
Note:
To match clamping screw with washer DIN 6319G against DIN 6319C or using spherical end of fixture nut DIN 6330B.

 

 
 
_  
For more information: E-mail: contact@itbona.com Phone:t +1 (952) 942-6104 FAX: +1 (952) 942-6106
Copyright@2002 - 2004 ITBONA Inc. All Rights reserved
ITBONA Inc, 9919 Valley View Rd, Suite 9919, Eden Prairie, MN 55344, USA